1993 Dodge Ram 5.9 wont start
#22
just went through same problem wit my 95 i turned out to be the shut of selinoid needed to be cleaned and adjusted cured my problem
The following users liked this post:
jasonfriedlin (12-18-2009)
#24
The other spade lug is for connection to the aft intake temp sensor, which in turn connects back through to the KSB.
#27
Hi guys thanks again for all the help i still have not got to work on my truck 2 get it to start. Ill get 2 it next week since we have a big snow storm starting tomorrow. Thank you. GOD BLESS YOU ALL
#29
Jason hi u doing hope evrthing all right. i will get 2 work on my truck by the end of the week and will give u guys an update. Thank You all ford the help Merry xmas to all
God Bless u all.
God Bless u all.
The following users liked this post:
jasonfriedlin (12-23-2009)
#30
Here i an update guys as i said 2 u guys before i got this truck not starting. the owner had took out the injection pump took it apart and put a seal on put back together truck will not start i took the pump out took it apart with a diagram i got from this website some parts were not on properly i took the spring and plunge out the fuel shutoff selenoid put back on the truck got it 2 start. But now i have a lot of white smoke. the engine skips and very poor acceleration. Help please: