99 f-350 or 450 shuttle bus help
#32
well the bus is still being looked at rite at this moment and seems to be looking twards the injector wiring harness rite now but he said should know whats wrong by next week and what all needs to be fixed
#33
if it ends up being the valvecover gaskets i have 2 that are used in good condition... pay shipping. i pulled them off my 99 stroke and replaced them because i thought that was the problem.... new ones are 60 bux EACH. if it ends up being the under valve cover harness buy them from Advance autoparts or orileys as i want to say they are like 35 bux a piece.
#34
wel we found out that it has two push rods broke one lifter bad and maybe have a broken cam so going to check it out this sat to see what all we need starting to move on it finally but still a little slow
#35
well i got the head off on the driver side and found out that after the two front push rods got bent pretty bad they up the lifters and pulled the lifters out very front one was flat on the roller so now need a cam and not sure what else its going to need now but probably have to pull the engine out and its no fun seeing how its in a van/bus so if any one happens to know where i can get a 7.3 cheap would be great or parts for it for next to nothing .
Last edited by MRaynor; 04-03-2009 at 10:09 AM.
#38
well i haven't been able to get back out to the bus yet but as far as i know we still need a cam shaft new lifters injector harness for both sides just to be safe and probably a new mechanic cause i hate working on any kind of van but hopefully soon with in the month we will have it back up and running.