different problem
#1
different problem
just got the new prot and ploishes, o-ringed haed with hd intake an exhaust springs and 12mm ARP head studs installed. fired the 12v up and let her idle for about 20 minuts noticed a puttle of oil under her, from the looks of it its comming from aournd the area of the blowby tube and tappet cover. its at the base but not at the top is were the oil is leaking. i pulled the valve covers and notice that the number 6 exhaust pushtube only compresses the valve no more than a 1/16" cold i have bent a pushtube and caused it to start leaking oil
#4
well i pulled the valve covers and took a look and this is what i found this is the exhaust pushtube from the number 6 cylander, everything else looks fine, now tell me how in the heck did this happen? not been seated properly in the lifter?
#6
yep thats what it looks like that and it is causing the tappet cover to leak thats how i noticed it, im hoping i can take a look at it might ahve to remove the starter to get to it, i do have to say that truck sounded mean with that rod like that i would love it to sound like that every day, but hey no water in the oil and no oil in the water now so my head issue is fixed
#8
HEY SLACKER, after you get done playing in the snow with the sled, i have a sale on 12 valve hamilton push rods! check my forum. hope you had fun snowmobiling and I want pictures!
#9
well atleats we got that issue worked out spent about $1400 more than i wanted to but thats part of owning a cummins i guess, now i just got to get the truck running, that push tube is a reall bight to the ars considering i had a bigger smyle on my face than a kid in a candy store when i got her running. priming it sucked as usual
---AutoMerged DoublePost---
anyone know if i can pull the tappet cover without removing the fuel pump
---AutoMerged DoublePost---
any idears on this removal proces im tackling it tommarow night anyway tips would be great
---AutoMerged DoublePost---
anyone know if i can pull the tappet cover without removing the fuel pump
---AutoMerged DoublePost---
any idears on this removal proces im tackling it tommarow night anyway tips would be great
Last edited by 94cummins12v; 11-30-2008 at 10:28 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
02-07-2023 01:15 AM
jeremy01995
12 Valve 2nd Gen Dodge Cummins 94-98
1
09-14-2015 06:34 PM
thurobred1320
12 Valve 2nd Gen Dodge Cummins 94-98
2
05-05-2015 09:26 PM