installed new lift pump and changed fuel filter. bleed thru twice. cracked lines and I'm only getting a dribble. no fuel in injectors . fuel shut off solenoid is fine. could this be computer problem or pdm? can anyone give me a hint?:

 

Welcome to Diesel Bombers
Are you getting fuel at the injectors?

 

no repeated cranking lines off

 

It is possible that the injection pump failed from no lift pump pressure. Is the injection pump mechanical or electronic?

 

don't think so, but possible mechanical with electrical signals

 

The only thing I could suggest is starting as near to the lift pump as possible and check for fuel there and work forward.
What about a relay for the lift pump is it clicking is the lift pump running?

 

You could also hook up a pressure gauge and see if you have any fuel pressure from the fuel pump.
But it is possible that the fuel pump went out after the lift pump went out.

 

more like a signal is not telling it to open. just don't know from where or how to check

 

lift pump clicking fuel pump and shut off solenoid working injector not opening is this electrical computer code or pdm?

 

Any Updates?