Going HAM on my 96 12v Cummins A/T
#1
Going HAM on my 96 12v Cummins A/T
I'd like to get more out of my 12v, I've just installed my boost, pyro, and trans temp gauges. I want to grind the plate to a #100, then slide the housing forward. I also want to install a new overflow plug, is that the same as the 2095 rack Mack plug? Then delete the notorious fuel heater and replace the hose connecting to the lift pump. I just ordered the fleetguard AH19037 (bhaf) and a 3" intake horn. I eventually want to get the 3 or 4 gsk. What else can I do for now, while maintaining a low budget? I just ordered a new pressure solenoid and transducer for my tranny, it has some issues hunting gears and not locking up the t/c, even after replacing the tps and making the rod adjustments. Does anyone have any other ideas what it could be if those two parts don't fix the trans problem?
#2
Thread
Thread Starter
Forum
Replies
Last Post
Josh Chretien
5.9L 12V Performance
5
03-01-2015 06:00 AM
Omingnome
Diesel In Distress - Support Ticket
5
10-20-2014 12:25 PM