I have a Pioneer AVH-P4000DVD that i have had in my truck for a while.
Pioneer AVH-P4000DVD DVD receiver at Crutchfield.com
I want to add a back up camera so i do not have to get out of the truck 3 times to line up a trailer. So i purchased an OEM Bezel and Camera from eBay.
The issue is i am unsure on how to wire the camera up.
On the back of the Head Unit there is a single RCA input.
The OEM Camera has 6 wires.
This is what i think each wire is:
Yellow: Video +
Brown: Video -
Gray: Reverse Feed
Red: Ignition +
I do not believe i have the stock wiring harness (i have not rummaged around to look).
And i am also under the impression that the Camera is 6v so i will need a http://www.ebay.com/itm/DC-DC-Converter-12V-Step-down-to-6V-3A-15W-Power-Supply-Automatic-Recovery-/161094129139?pt=BI_Circuit_Breakers_Transformers&hash=item2581f555f3.
I was gonna run the red to a 12v when key is on.
Gray to the reverse positive
Ground to ground
Cap the White
But lost on what to do with the Video positive and negitive.
Any help would be great.