Need some help.
#13
#15
i was lazy and did the BD manifold swap on my driver side, worked out great.
You can just use a Tee to tap into the wastegate line where your boost increase valve is, use some 1/4 barb fittings and a tee which can be found at most part stores.
mine used to look like this
Heres the BD manifold i did.
(the bd is on top and driver side manifold is on the bottom)
You can just use a Tee to tap into the wastegate line where your boost increase valve is, use some 1/4 barb fittings and a tee which can be found at most part stores.
mine used to look like this
Heres the BD manifold i did.
(the bd is on top and driver side manifold is on the bottom)
#16
#17
yea yeah i know. i was just in a hurry and clicked the wrong one.
---AutoMerged DoublePost---
alright the boost gauge is in and workin. lights are workin. all that's left is the pyrometer...
---AutoMerged DoublePost---
alright the boost gauge is in and workin. lights are workin. all that's left is the pyrometer...
Last edited by Big_Johnson; 12-05-2008 at 08:52 PM. Reason: Automerged Doublepost
#19