Lift Pump
The following users liked this post:
zbructo (10-04-2010)
#3
Like kit or plumb in yourself? I plumbed in a 10 psi walbro FRB-5 followed by a high eff filter base from napa and it works great. I spent less than $140. My max tune is between 400-500hp.
Also it is so much quieter than a fass or airdog. You can hear it clicking when parked at idle but my engine drowns it out when I take off.
It is a flow through design as well in case it ever does fail it won't leave you stranded.
A down side is that it is 1/4 npt, but I used stainless fittings and drilled them out to the same size as the heavy wall tubing I plumbed it in with. IMO it shouldn't matter while the pump is working. It is capable of flowing 60 GPH.
Also it is so much quieter than a fass or airdog. You can hear it clicking when parked at idle but my engine drowns it out when I take off.
It is a flow through design as well in case it ever does fail it won't leave you stranded.
A down side is that it is 1/4 npt, but I used stainless fittings and drilled them out to the same size as the heavy wall tubing I plumbed it in with. IMO it shouldn't matter while the pump is working. It is capable of flowing 60 GPH.
Last edited by bftrain; 10-04-2010 at 09:59 AM.
The following users liked this post:
zbructo (10-04-2010)
Thread
Thread Starter
Forum
Replies
Last Post
Renteria1217
24 Valve 2nd Gen Dodge Cummins 98.5-02
4
04-16-2015 11:38 PM
klein444
Chevy/GMC 6.2L and 6.5L
2
02-21-2015 10:33 AM