1995 6.5TD
#11
got my truck running today.. found more issues the mice have chewed the wires to the ecm fixed all the wires. Now thinking I need a pmd it gets so hot you can't touch it and yes I have the relocation kit. When the pmd gets hot the engine dies. I am picking up a new pmd in the morning hoping this fixes the probem. I replaced the starter this morning was having issues with it. also replaced the LP and the OSP so hoping I'm narrowing in on the actual issue.
#12
also check for gound ground on PMD wiring harness . That could be cause of PMD getting hot also where is it relocated and I use a Super cooler . seems to cool better I found them on Ebay for $30.00 . Also make sure that Fuel shutoff silinoid on Injection pump is wiorking . I had a close to same promblem and turned out to be a faulty shut off. While engine running just tap on side Lightly with a plastic handle of screw driver. and she if it stubbles engine if so replace it.
Thread
Thread Starter
Forum
Replies
Last Post
windage
12 Valve 2nd Gen Dodge Cummins 94-98
7
07-17-2015 12:45 PM
Diesel Bombers
General Diesel Related
0
12-05-2014 05:50 PM