broken screws in injection pump cover
#1
broken screws in injection pump cover
I was removing the 3 small flat head screws from the injection pump cover. 2 out of the 3 broke off, about 1mm form the base. Any suggestions on how to get these out, or should I replace the IP?
Robert
1984 GMC K20 6.2L diesel 4x4
Robert
1984 GMC K20 6.2L diesel 4x4
Last edited by jedibob; 10-19-2011 at 11:10 AM. Reason: punctuation
#2
Ouch, try a reverse drill center punch the screw and use a reverse drill the size you would need to rethread and retap for the screws. Its not a cake walk and will take a bit of skill, just be careful and take your time and if done properly you will save your self some money. I say to use a reverse drill because sometimes you get lucky and it pulls the screw out but you can use a regular drill bit if you choose.
#4
Thread
Thread Starter
Forum
Replies
Last Post
HardLuck
Diesel In Distress - Support Ticket
0
06-24-2015 08:04 AM
nelly559
Dodge Truck and Cummins Turbo Diesel Forum
0
02-17-2015 06:49 PM