Is your PMD ground at the IP

Check all ground and straps and clean

put clear fuel line on the return side of the IP see if you have bubbles

crack open a injector line see if fuel getting to the injector

check your fuel housing for dirt in the bottom of the blow

take the OS Filter off and plug the wires back in top of IP

also do the OPS and LP test first

 

Well broke loose a line and mo fuel coming to it. Bad ip?

 

Did you loosing the at injector

 

Yep sure did

 

6.5 went to running bad then died restarted ran a few mins rough. then died very hard to start
will start and run for 2-3 sec bad then die.. plenty of fuel at filter. LP ok.