6.5 timing injector pump
#23
04-24-2021, 10:00 PM
Scanner
Sorry to say that it can't be done with basic tools.
There is no way to set injection timing on a 94/95 electronic IP other than the scan tools mentioned above.
If you own a 94/95 6.5 you really should invest in the software/cable that goes with GMTD ScanTech pro version.
$160 for GMTD ScanTech
$60 for the cable
There is a way to make the cable for about $10 also but is a little crude.
Since the vendor is not a site sponsor I can't post the link but PM me if you want the info.
---AutoMerged DoublePost---
The ECM has to learn where the IP physically is situated at to control timing and to even report the timing to a scan tool.
The problem arises when the IP is moved or replaced-there will be a timing value in the computer that it thinks is correct and no matter where the IP's actual location is in relation to the crank the ECM won't know a change has been made unless it is commanded to relearn the new IP location-ONLY the above mentioned scan tools have the ability to force that relearn on a 94/95 6.5 electronic IP engine.
There is no way to set injection timing on a 94/95 electronic IP other than the scan tools mentioned above.
If you own a 94/95 6.5 you really should invest in the software/cable that goes with GMTD ScanTech pro version.
$160 for GMTD ScanTech
$60 for the cable
There is a way to make the cable for about $10 also but is a little crude.
Since the vendor is not a site sponsor I can't post the link but PM me if you want the info.
---AutoMerged DoublePost---
The ECM has to learn where the IP physically is situated at to control timing and to even report the timing to a scan tool.
The problem arises when the IP is moved or replaced-there will be a timing value in the computer that it thinks is correct and no matter where the IP's actual location is in relation to the crank the ECM won't know a change has been made unless it is commanded to relearn the new IP location-ONLY the above mentioned scan tools have the ability to force that relearn on a 94/95 6.5 electronic IP engine.
- where can a person get the scanner and cable needed to time a1995 ip
Thread
Thread Starter
Forum
Replies
Last Post
quiksilver1j
1st Generation Dodge Cummins 89-93
1
07-30-2015 12:41 PM
