1993 Chevy 6.2l, white smoke, shaking, missing.
#11
#12
I moved the injector, no change. I borrowed a diesel compression tester, from a very nice mechanic. I should get him some donuts.
I will post the numbers. They will be cold, do to me removing the valve cover. The Idiot PO got RTV over EVERYTHING, rockers, rods, springs. spent an hour cleaning it up. 2 hours getting there.
---AutoMerged DoublePost---
Where the heck is the edit button? if a mod could combine my three posts, into one that would be great.
The tester I had didn't work correctly. (didn't hold the reading.) My numbers are incorrect, but cold with a bad tester 285-325PSI, save for CYL #3 not even a 100PSI.
I going to pull the head, and have it tested.
Thank you for your help.
I will post the numbers. They will be cold, do to me removing the valve cover. The Idiot PO got RTV over EVERYTHING, rockers, rods, springs. spent an hour cleaning it up. 2 hours getting there.
---AutoMerged DoublePost---
Where the heck is the edit button? if a mod could combine my three posts, into one that would be great.
The tester I had didn't work correctly. (didn't hold the reading.) My numbers are incorrect, but cold with a bad tester 285-325PSI, save for CYL #3 not even a 100PSI.
I going to pull the head, and have it tested.
Thank you for your help.
Last edited by bleach64; 03-08-2013 at 12:37 PM. Reason: Automerged Doublepost
#15
I checked by having the CYL #3, complete the stroke and just starting to travel back down. There was a nice clunk when I pushed on the piston, with a wood stick. The piston moved down.
Not the wrist pins/bushings? Then crap.(can't use the words I would prefer, but maybe that is a good thing.)
The rockers are fine.
Not the wrist pins/bushings? Then crap.(can't use the words I would prefer, but maybe that is a good thing.)
The rockers are fine.
Thread
Thread Starter
Forum
Replies
Last Post
mattshow123
12 Valve 2nd Gen Dodge Cummins 94-98
14
03-12-2018 01:41 PM
wpg6.5
12 Valve 2nd Gen Dodge Cummins 94-98
7
03-22-2015 12:38 PM
Fishy816
Chevy/GMC 6.2L and 6.5L
3
01-11-2015 08:31 AM