Wiring up a prank
#21
#22
we have tons at our shop, they are used on power poles for the cable lines. if you use the standard ties 6" i think and dubble them up near the tranny/t case they will hit the frame or cross members
---AutoMerged DoublePost---
try gemplers.com they have the 14" ties
---AutoMerged DoublePost---
try gemplers.com they have the 14" ties
Last edited by moparcop; 09-30-2010 at 08:27 PM. Reason: Automerged Doublepost
#24
#26
#29
one we used to do takes a little longer. we did it to a buddies endro car. installed a micro switch on throttle. wired it to the wiper sprayers. whenever he was at 1/2 throttle or more(which is alot during an endro) the sprayers squirted him(no windsheild). he was soaked when his car quit running due to the ignition getting sprayed as well.
also did one to a group of guys we used to drag race with. they broke early and left the track to go drink off their sorrows. when we went out we met up with them at the bar for dinner. after we got done we walked out to the truck, and seen theirs sitting there. walked over, unhooked chains and light cord and picked the trailer up just off the ball. then we left. they drove half way home(2.5 hr ride) before noticing not having the trailer back there.
also did one to a group of guys we used to drag race with. they broke early and left the track to go drink off their sorrows. when we went out we met up with them at the bar for dinner. after we got done we walked out to the truck, and seen theirs sitting there. walked over, unhooked chains and light cord and picked the trailer up just off the ball. then we left. they drove half way home(2.5 hr ride) before noticing not having the trailer back there.
Last edited by DieselCrawler; 10-01-2010 at 09:47 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Mike H
12 Valve 2nd Gen Dodge Cummins 94-98
1
11-25-2014 03:13 PM