99-03 7.3L Performance Discussion of 99-03 7.3 Liter Ford Powerstroke Turbo Diesels Related To Performance And Longevity

GTP38R Installed

Thread Tools
 
Search this Thread
 
  #21  
Old 04-28-2011, 04:12 PM
dbranson1's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Apr 2010
Location: Boise, Idaho
Posts: 132
Received 16 Likes on 16 Posts
Default

I got the 6 position chip today, Question: What do I do with the opening into the computer where the chip cable runs back out..? It seems that a lot dirt and dust can get in there, any ideas?
 
  #22  
Old 04-28-2011, 07:33 PM
95powersmoker's Avatar
BOMBARDIER
Join Date: Mar 2010
Location: Ellensburg, WA
Posts: 2,959
Received 187 Likes on 161 Posts
Default

Originally Posted by dbranson1
I got the 6 position chip today, Question: What do I do with the opening into the computer where the chip cable runs back out..? It seems that a lot dirt and dust can get in there, any ideas?
Most people just tape the chip in place thereby covering the hole and keeping dust and stuff out... It also ensures that the chip won't rattle out or anything.
 
  #23  
Old 04-28-2011, 10:08 PM
dbranson1's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Apr 2010
Location: Boise, Idaho
Posts: 132
Received 16 Likes on 16 Posts
Default

Ok, I had thought that might be the scenario, but I tend to get way to redneck with the duct tape...Thank you!
 
  #24  
Old 04-29-2011, 10:32 AM
Lange503's Avatar
Diesel Bomber
Join Date: Feb 2010
Location: Vernal, Utah
Posts: 1,058
Received 45 Likes on 44 Posts
Default

i left mine and haven't had issues, then again my truck is a road queen, no dirt roads for it
 
  #25  
Old 04-29-2011, 06:10 PM
dbranson1's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Apr 2010
Location: Boise, Idaho
Posts: 132
Received 16 Likes on 16 Posts
Default

Ok, well installed the TS chip in today and I put the truck through some paces...here's what I found...I was boosting about 25-26 psi, now it's back down to 20 psi, the egt's are through the roof and my check engine light comes on and stays on.

Now I'm puzzled as to what the truck should be doing, when I got home I popped the hood to quick glance at the motor and I noticed the Turbo was blue!

Can someone give me some insight to what might be happening if anything?...I am just nervous about screwing something up.

By the way, TS chip has no custom tunes on it just straight from Advanced Diesel...I was going to wait to get custom tunes when I get the injectors re-done by Rosewood.
 

Last edited by dbranson1; 04-29-2011 at 06:13 PM.
  #26  
Old 04-29-2011, 11:35 PM
Diezel Dawg's Avatar
Diesel Enthusiast
Join Date: Jan 2009
Location: Spokane, WA
Posts: 216
Received 8 Likes on 8 Posts
Default

Something isnt seated right, whether it is your intake Y or the turbo to the Uppipe Collector. You will need to double check everything
 
  #27  
Old 04-30-2011, 12:09 AM
dbranson1's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Apr 2010
Location: Boise, Idaho
Posts: 132
Received 16 Likes on 16 Posts
Default

Originally Posted by Diezel Dawg
Something isnt seated right, whether it is your intake Y or the turbo to the Uppipe Collector. You will need to double check everything
Is that going to be reason for the check engine light and the elevated egt's as well?
 
  #28  
Old 04-30-2011, 03:34 PM
99stackedpowerstroke's Avatar
Diesel Wrench
Join Date: Dec 2009
Location: southeast Iowa
Posts: 687
Received 16 Likes on 10 Posts
Default

okay if that oring is missing or screwed up what will it do to your EGTs and boost??
 
  #29  
Old 04-30-2011, 04:32 PM
joebob3093's Avatar
Moderator
Join Date: Jul 2008
Location: Powell Butte, OR
Posts: 2,558
Received 138 Likes on 122 Posts
Default

it will cause low boost and high EGTs
 
  #30  
Old 04-30-2011, 09:03 PM
dbranson1's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Apr 2010
Location: Boise, Idaho
Posts: 132
Received 16 Likes on 16 Posts
Default

I tore into the truck...Again! The O ring on the Turbo outlet is okay and seated, the O rings where the Turbo mounts are fine and seated...all the V rings clamps are tight and sealed...

When I put switch to the 140 extreme hp on the TS Chip I cannot get up past 20 psi of boost and the egt's climb so fast the gauge moves like the speedometer...

When I switch to the 100 hp on the Chip, I can get damn near 30 psi of boost and the egt's don't climb near as fast...

And is the Turbo supposed to turn blue?
 


Quick Reply: GTP38R Installed



All times are GMT -5. The time now is 08:55 PM.