VP44 Information
#1
01-07-2009, 04:49 AM
The following 2 users liked this post by wildbill:
cmns2500 (08-05-2009),
Dan.tha.Cummins.man (01-13-2009)
#2
01-10-2009, 02:17 PM
Diesel Wrench
okay,this must be where we post stuff relating to the VP,info,and where to buy eh?
I'm down for that.
Blue chip has some info too.
VP44 DIAGNOSTIC HELP
MWFI has the CPL tag location at the bottom of the page.
Dodge VP44 Bosch Injection Pump Cummins 5.9L 24 Valve
I'm down for that.
Blue chip has some info too.
VP44 DIAGNOSTIC HELP
MWFI has the CPL tag location at the bottom of the page.
Dodge VP44 Bosch Injection Pump Cummins 5.9L 24 Valve
The following users liked this post:
Dan.tha.Cummins.man (01-13-2009)
#4
06-23-2009, 12:23 PM
The HRVP is pretty much a dead issue. It's been proven to only be worthwhile in a very few select case where it is the only HP mod being used, other then that it takes power away from your other mods and is counter productive.
The following users liked this post:
cmns2500 (08-05-2009)
#5
06-23-2009, 01:12 PM
#6
06-23-2009, 06:29 PM
k i can cross that out then so i have heard that u can p-pump the 24v is that converting it to the p7100 injection pump? and if so can sombody post somthing on that
#8
07-09-2009, 11:40 PM
Banned
#9
07-15-2009, 08:42 PM
Newbie
Join Date: Jul 2009
Location: Columbus
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
if you go to puredieselpower.com they have the VP44 to the P7100 fuel lines and my suggestion is to find a p pump at a junk yard unless you want to pay 2500 dollars for a new one
#10
07-16-2009, 02:53 PM
Fueling limits of the HO pump is about 500HP
Fueling limits of the SO pump is about 600-650HP
remember you can put an SO on an HO and it will run and produce more power if you have injectors and box
Fueling limits of the SO pump is about 600-650HP
remember you can put an SO on an HO and it will run and produce more power if you have injectors and box
