Question for someone with a Co-Pilot
#11
SugarBear what exactly is going on with yours? I got the tran billet input shaft billet flex plate and co pilot. had on the road 6 days and smoked the trans I think waiting to call ATS this morning when they open. Shifts 1 threw 4th then neutral instead of fifth coasts to a stop down shifts to first and stays there if you shut it off and restart will shift threw 4th again and do the same. Lots of money down the drain real unhappy right now hope they make this right Quickly.
---AutoMerged DoublePost---
I have everything in my sig and just put on the 3rd gen mani and sb66. Im guessin im around 450hp. R&r is free, this is costing ats the money to fix me from shipping and the bill the shop sends them to install it. I was going to install it the first time but after reading thier warrenty disclaimer I decided I would have an ats dealer shop install it all. I am just hoping When I pick it up monday it works right!
---AutoMerged DoublePost---
just got back from doing a bunch of tests with a starscan and when mine does the hole neutral thing after shifting into 4th its throwing a p0734 fault code in the tcm, I cant remember what the code exactly is but speed difference ratio in 4th gear, which tracing the code and doing the tests, it could be multiple things wrong but in my case overdrive clutches are smoked, and wont hold at all doing the clutch slip tests. So ill be puling my tranny probably tonight and tear into it, and be ordering an ats tranny.
Last edited by kmkdiesel; 08-22-2011 at 04:08 PM. Reason: Automerged Doublepost
#12
Yea I had the quick learn done before the truck ever moved they charged me 140.00 to do it. Clutches were smoked on mine too both the stock tranny and the ATS one did the same thing. Those under and over drive clutches are the weak link specially if you have added HP and torque. The problem is addressed by the co pilot by adding more pressure to those clutch packs to keep them from slipping. The ATS tranny also has a better clutch material and more surface area on those clutches but if the co pilot does not raise the pressure like it is supposed to do they will still smoke. I think stock pressure to clutch pack is like 150 and the co pilot brings it up to like 280. The problem is the co pilot is not working on all trucks think it has something to do with all the different flashes that our tcm's have and they are trying to make it work regardless of what flash you have. I should have my new tranny and new co pilot by this Friday will have it in this weekend if so I too will keep you all updated.
#13
wow thats a rip off, it takes more time to plug the scanner in and let it communicate to the truck then it does to do a relearn, but if it takes them more then 10min to hook up and do the relearn then they must not know what they are doing the actual relearn takes about 30 seconds. My dealer is awsome, they have a spare star scan since they updated to all the wireless stuff so i can borrow it when ever I want, and use any of there service manuals or specialty tools.
#14
Ok got my new tranny, tc, co pilot installed today. Round two. Hope it goes better than round one. Got a guy coming to do the quick learn tomorrow not going to drive it till its done. Going to baby it for a week then ***** to the wall and see if its going to hold up. I'll keep you updated.
#15
#17
Not sure whats going on yet. Had a stereo put in truck right before the problem with the tran started and it had a u1403 code along with the p0700 code so they think changing the radio might have something to do with it. Sounds like bull to me took the truck to dodge dealer and they said the trans line pressure sensor is bad which caused low pressure in the trans which smoked the clutch packs. Now the engineers at ATS want to talk with the tech at my Dodge dealer so round and round we go. Will see what happens.
#18
Man That blows! I hate Getting the run around. So did they send you the updated co-pilot? I know thats the code that kept coming up when i had the original cp, is the low line pressure. Also do you know what flash is on your truck? the other day my tranny started to make some clunking noises and doin some hard downshifts at the wrong times. thought i would have to deal with getting another tranny. after I shut it down went and did some shopping, started it up and has drove fine for the past 3 days. So I guess time will tell.
#19
I tried unhooking copilot and cleared codes same thing. Still waiting to here from Ats they are checking into it what ever that means. I just want my truck to go down the road and roll some coal now and then. Have no idea what flash I have but ATS has not asked so I guess they are not worried about it. Tomorrow makes another week with out a ride its been broke 6 out of the last 8 1/2 weeks. 70,000 dollar boat anchor. I'll let you know what happens.