6.7 Liter Dodge Cummins 07.5-12 Discussion of 6.7 Liter Dodge Cummins Diesels

Cant find cause of shutter

Thread Tools
 
Search this Thread
 
Old Oct 12, 2010 | 08:31 PM
  #1  
beerlvr's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2010
Posts: 54
Likes: 1
From: North MS
Default Cant find cause of shutter

just bought 08 3500 has a shutter felt at 68-72 mph, clears up above and below, balanced and rotated tires, removed front driveshaft, changed steering stabilizer and tie rod on pitman arm, nothing has changed, any ideas???
 
Reply
Old Oct 12, 2010 | 10:50 PM
  #2  
skinnysfd's Avatar
Diesel Enthusiast
Joined: Feb 2009
Posts: 450
Likes: 18
From: Sheldon iowa
Default

could be a bad rear u joint,carrier bearing, bent rear drive shaft. My 06 had a really bad shutter and i ended up replacing all the rear u-joints and carrier bearing and the problem has never shown up since. my 05 started to get a shutter like this too and it ended up beign a front wheel u-joint so i replaced em both
 
Reply
Old Oct 13, 2010 | 09:52 AM
  #3  
Heath's Avatar
Authorized Amsoil Dealer
Joined: Mar 2007
Posts: 1,122
Likes: 122
From: Mason City, Iowa
Default

Damn trucks...mine has this but have to date found no fix. New joints, tires, checked driveshaft. Still nothing. I would think if it was something in the tranny or rear end it would have fallen apart by now? I've driven it 20k+ with the problem. Irritating!!
 
Reply
Old Oct 17, 2010 | 06:28 PM
  #4  
beerlvr's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2010
Posts: 54
Likes: 1
From: North MS
Default

new u- joints in still shuttering, took it to dodge told them they should fix it they re- balanced and road forced the tires still isnt better, now i'm fighting with them since it has 64,000mi. they dont want to touch it.
 
Reply
Old Oct 18, 2010 | 09:56 AM
  #5  
Heath's Avatar
Authorized Amsoil Dealer
Joined: Mar 2007
Posts: 1,122
Likes: 122
From: Mason City, Iowa
Default

If I run it up to 75mph and drop it into neutral, it runs smooth as silk, so it only occurs when you are in the gas.
 
Reply
Old Oct 18, 2010 | 10:54 AM
  #6  
beerlvr's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2010
Posts: 54
Likes: 1
From: North MS
Default

i tried that and it still shutters comming back down through 70ish, wish i could figure it out it driving me crazy, dodge said they are looking for a driveshaft to swap in to see if that would fix it.
 
Reply
Old Oct 18, 2010 | 10:55 PM
  #7  
kmkdiesel's Avatar
Diesel Enthusiast
Joined: Jun 2010
Posts: 176
Likes: 7
From: Bear Lake, Idaho
Default

read this and hopefully it helps you guys out.

Getting to the Bottom of the 68RFE Shudder w/ TransEngineer's Help - Dodge Cummins Diesel Forum

---AutoMerged DoublePost---

also if you have the 2 piece drive shaft, swapping it out to the one piece is a big help also if its not tranny related shudder.
 

Last edited by kmkdiesel; Oct 18, 2010 at 10:55 PM. Reason: Automerged Doublepost
Reply
Old Oct 19, 2010 | 08:19 AM
  #8  
beerlvr's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2010
Posts: 54
Likes: 1
From: North MS
Default

not sure if that is my problem , my truck is 100% bone stock for now, and it is a 1 piece driveshaft, i just want to figure it out before i do my deletes
 
Reply
Old Oct 19, 2010 | 08:55 AM
  #9  
Jagsdiesel's Avatar
Diesel Bombers Sponsor- Jags Diesel
Joined: Oct 2010
Posts: 175
Likes: 12
From: Zimmerman, Mn
Default

Does it shudder at those speed while crusing or while accelerating and pushing through that speed. We have ran into a lot of torque converter shudder while on the throttle around that speed.
 
Reply
Old Oct 19, 2010 | 08:29 PM
  #10  
beerlvr's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2010
Posts: 54
Likes: 1
From: North MS
Default

both but worse if you just stay at 70, it comes and goes a little, and doesn't start till i get a few miles down the road when everything warms up..

filed a claim with dodge customer service they had me bring it back to dealer they suppost to pay for the repairs, should know in a few days what is causing it.
 
Reply



All times are GMT -5. The time now is 03:27 AM.