What do i have to do to make 450hp with 1st gen
#11
05-19-2011, 01:11 AM
Thanks i will be glad to you have really good stuff on your site and also good prices. i checked into a compound set-up and i think it could be possible
---AutoMerged DoublePost---
If i do go with compound what should i get. I was thinkin maybe s400/ht3b
---AutoMerged DoublePost---
If i do go with compound what should i get. I was thinkin maybe s400/ht3b
Last edited by Dodgeram2000; 05-19-2011 at 01:11 AM. Reason: Automerged Doublepost
#12
05-19-2011, 01:12 AM
no problem man as alot of these 1st gen guys (any of my customers for that matter)
will tell you we are always willing to help you with your builds or issues we dont just
push parts we work on these trucks, and have trucks of our own!
well I really like HX35 over S480 the HT3b is a good lower too
will tell you we are always willing to help you with your builds or issues we dont just
push parts we work on these trucks, and have trucks of our own!
well I really like HX35 over S480 the HT3b is a good lower too
#13
05-19-2011, 01:21 AM
Sorry had to guys. Brice is good people, good guy to deal with.
The following users liked this post:
big bad diesel 416 (05-19-2011)
#14
05-19-2011, 07:54 AM
Diesel Enthusiast
if you p pump it then just go ahead and buy a 2nd gen i plan on making alot of horse power with me truck on a ve pump with a ppump its to easy
---AutoMerged DoublePost---
also i havetn ever done bisnuess with bbd but ive talked with him and the people over there are good they will get you what you need
---AutoMerged DoublePost---
also i havetn ever done bisnuess with bbd but ive talked with him and the people over there are good they will get you what you need
Last edited by Levi Miller; 05-19-2011 at 07:54 AM. Reason: Automerged Doublepost
The following users liked this post:
big bad diesel 416 (05-19-2011)
#15
05-19-2011, 06:47 PM
6X18's will be too much for a 1st gen unless u run lots of air
For a reliable, consistent DRIVEABLE/WORKABLE truck,(not a dyno-queen shop truck) 450 rwhp you need big sticks and big air. That is why I recommended 6x18's. They work great with the turbo setup I recommended
we were 419HP on the dyno with our 1990 2wd 5 speed and did it for less than 2k
Impressive. Care to share your setup on this truck?
For a reliable, consistent DRIVEABLE/WORKABLE truck,(not a dyno-queen shop truck) 450 rwhp you need big sticks and big air. That is why I recommended 6x18's. They work great with the turbo setup I recommended
we were 419HP on the dyno with our 1990 2wd 5 speed and did it for less than 2k
Impressive. Care to share your setup on this truck?
---AutoMerged DoublePost---
You need a top turbo. You could do a S300/HT3B, S300/S400, HX35/S400, HX35/HT3B, etc. I have even seen people put a big charger under a stocker H1C.
Last edited by ARbowhunter7; 05-19-2011 at 06:47 PM. Reason: Automerged Doublepost
#16
05-19-2011, 07:39 PM
a 300 over HT3B will not be able to cool 6X0.18's to its full capabilities
and on the street for a good DD truck 5X0.14's is all you need I have had guys that wanted 16's 18's even 20's SO bad and we tryed to talk them out of them but they just had to have them all but one guy out of 7 have called back and bought a set of 14's the other guy went sole puller and he likes them and there only 16's
if you want a hot smokey injector get 18's or bigger unless you really get pumping the fuel and the air you will be real unhappy with them
and on the street for a good DD truck 5X0.14's is all you need I have had guys that wanted 16's 18's even 20's SO bad and we tryed to talk them out of them but they just had to have them all but one guy out of 7 have called back and bought a set of 14's the other guy went sole puller and he likes them and there only 16's
if you want a hot smokey injector get 18's or bigger unless you really get pumping the fuel and the air you will be real unhappy with them
#17
05-19-2011, 09:09 PM
#18
05-21-2011, 05:05 PM
Is this truck a manual or an auto? I've seen manual first gens dyno 400+ whp on a single S300.
http://www.dieseltruckresource.com/d...s-t277238.html
http://www.dieseltruckresource.com/d...s-t277238.html
Last edited by The_Head; 05-21-2011 at 05:09 PM.
#19
05-22-2011, 09:48 AM
a 300 over HT3B will not be able to cool 6X0.18's to its full capabilities
and on the street for a good DD truck 5X0.14's is all you need I have had guys that wanted 16's 18's even 20's SO bad8 and we tryed to talk them out of them but they just had to have them all but one guy out of 7 have called back and bought a set of 14's the other guy went sole puller and he likes them and there only 16's
if you want a hot smokey injector get 18's or bigger unless you really get pumping the fuel and the air you will be real unhappy with them
and on the street for a good DD truck 5X0.14's is all you need I have had guys that wanted 16's 18's even 20's SO bad8 and we tryed to talk them out of them but they just had to have them all but one guy out of 7 have called back and bought a set of 14's the other guy went sole puller and he likes them and there only 16's
if you want a hot smokey injector get 18's or bigger unless you really get pumping the fuel and the air you will be real unhappy with them
The following users liked this post:
big bad diesel 416 (05-22-2011)
#20
05-22-2011, 11:43 PM
