Flex-plate
#11
04-26-2011, 08:10 PM
See the contact area in the center of this flex plate comparison... The center area on the converter makes contact there.
If you ask your converter guy to just turn the differance down on the converter it will all bolt up just fine. In most cases a converter builder will do this for FREE!!.
BC847 has a great picture showing the difference in thickness stock to SFI..
If you ask your converter guy to just turn the differance down on the converter it will all bolt up just fine. In most cases a converter builder will do this for FREE!!.
BC847 has a great picture showing the difference in thickness stock to SFI..
Last edited by SNOOT; 04-26-2011 at 08:16 PM.
The following users liked this post:
RSWORDS (04-28-2011)
Thread
Thread Starter
Forum
Replies
Last Post
cdetterer
5.9 Liter CR Dodge Cummins 03-07
3
01-22-2015 08:38 PM
JustAnother_cummins_guy
12 Valve 2nd Gen Dodge Cummins 94-98
4
11-10-2014 09:44 PM
