Non-ic intake horn mods needed
#11
i believe i used some 3/8" steel for my plate. no problems with distortion or leaks to my knowledge, i know it took forever to cut a 3" hole in it with a hole saw. i ordered a mandrel bent pipe from summit for 43 bucks shipped i think, just cut it and welded it back together with the angles i needed, did it all by eye and side by side comparison to the stocker, didnt know where to get the required boost coupler at the time so i use an exhast adapter cocked in the 3" at an angle to take up the extra space and filled it with weld, i'll see about getting some pics
#12
Here my reasoning for gettin one: Im gettin a different turbo and am going to intercool it in the future so if i get one now i can enjoy it and later after i ic it i could just flip it around, maybe with some minor mods, and hook up my ic tubes to it and have a larger intake as well. Thats just my thoughts. I would make my own but i cant make the square piece where it bolts on over the grid heater.
Thread
Thread Starter
Forum
Replies
Last Post
caissiel
Ford Powerstroke 03-07 6.0L
1
09-24-2015 05:37 PM
jrsavoie
Chevy/GMC 6.2L and 6.5L
1
02-06-2015 09:44 PM
rtbcoop
12 Valve 2nd Gen Dodge Cummins 94-98
0
12-30-2014 02:13 AM