so, i got abit dangerous with the tape measure a day or two ago, made all of my measurements drew it out on a piece of paper then transfered it all to scale on the big sheet of diamond plate, cut it all out, de-burred it and bent it all up tonight, finish product looks pretty freakin good i think i improved the mount abit so i'm going to include a thing of the blue prints, still not perfect; some added fabrication will be needed... hole for the filter needs to be cut and then the supports for the filter itself aren't included but; here's the semi finished result

 

alright scratch my blue prints... they suck; had to modify and make afew more cuts. but i guess it's easier to take material off than put it back on

 

on mine i bolted it to the fender and used those pop rivit things thar are threaded inserts just a thought

 

i used self tappers to mount it to the fender i have to get a different/ better clamp the factory one snugs it but it isnt overly tight b4 it bottoms out... i've read this is a common problem