i bought a DennyT last week....

 

You can get Denny's pin off his site now.

Denny T Performance | First Gen Dodges

 

Does anyone know if the DDP fuel pins are good? It adds 10HP more than the DennyT and costs around $90 more.

 

all of the power pins add about 30-40 horsepower.....you want to know how some of these guys are getting 50+ horse with their pins, they are dynoing a built truck with a stock pin (stock pin is severely holding the truck back) then dynoing the truck with the new deep pin and thats where it comes from, the Bully Dog pin is complete junk, the PDR pin is a cut factory one i believe, i would go Smokey, Denny, M&H, or anyone that has one made out of good hard tool steel.......



OR GIVE ME A COUPLE WEEKS AND DEPENDING ON WHAT THEY COST ME I MAY SEND YOU ONE OF MINE FREE......IM HAVING SOME MADE AT THE LOCAL MACHINE SHOP.....

 

Yeah they are all about he same, I think DennyT's stage 2 has teh most agressize profile out there.

 

If you are going to get the Ol' Smokey pin, be sure it is the original and not the remake by Bully Dog. The Bully Dog pins are made of soft steel and gouge. The original ones will have a "OS" stamped on the bottom. I have the DennyT and the 3200 spring and those made me a whole new truck.

 

The DDP, bully dog, and old smokey were all designed by Mike.
Bully Dog and DDP make and sell them without his permission.
There are quality control issues with them, too, Bully dog pins will groove.

Order an Old Smokey directly from Mike, it's heat treated and he gives you a guarantee!

 

So does M&H and DennyT.... Both of which are about half teh price. M&H is also a sponcor on here!

 

Old smokey is 100 bucks.

 

I just made my own