Is the billet adapter so you can hook it up to the stock fuel bowl. it usually is 0-20 in jan. I had planned to run 50/50 in the winter

 

Yes it does. Heres the big line kit Glacier Diesel Power and heres the adapter Glacier Diesel Power

But I would highly suggest calling him directly and tell him what your planning to do and he will hook you up with what you need. Ive bought a couple things from him and hes awesome to work with!

 

Thx for the links. Where does that billet piece go

 

Right on the fuel filter housing where the stock lift pump use to be when u remove it...

 

And all. That will. Allow me to use my stock fuel bowl. Heater

 

Yes...

 

Hey thx for all your help. It took me 2 hours to hook it all up. I will get the parts later toeither hook up a tank heater or both.

 

the only struggles I had was mounting the pump bracket. In the instructions it shows tons of room to mount it in the inside but I wasnt so fortunate. I believe the install was done on a long box or the tank was removed for the picture. so I mounted it on the outside of the frame.
the other problem was removing the stock hose on the fuel tank. I didnt have enough room to get my hands in there. But I took off the wheels and was able to get r done.

and if any of you wants to keep your stock fuel heater located in your fuel bowl with your air dog system you have to get a different adapter than posted above. this is the one you need Glacier Diesel Power
this one will allow you to use the airdog 1/2" hose. the adapter posted above is for their big line kit which is 3/8" hose.

 

I am going to install the parts this weekend for the glacier kit. Is there any way to recirculate the heated fuel back to the tank?