When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Edge comp on and now my truck stays at full throttle
i just installed an edge comp box and it drove fine at first i drove it about ten miles and my rpms started jumping then ten more miles the truck stays at full open throttle. any ideas?
its not the edge. i disconnected it fully and it still did it i pull off the plastic cover off of the throttle cable assembly area and the top cable on the engine side is slack. no tension whats so ever. i traced it back to an assembly on the front underside of the driver side battery.
also there was i think a small vacuum hose that came off of the assembly at the front underside of the drive battery that i broke messing around with trying to see what was happening. will the apps reset put tension back on the cable?
ok so when we removed the whole triangle shaped throttle assembly (the black box on top of the vp) to get the wires on the pump to tap it for the edge, could we have stretched a cable or messed up the apps? or is that a fairly tough system