SMARTY Settings
#31
#32
#36
#38
not trying to hijack a thread here. but i updated my smart CR with smartys TNT software. i noticed a difference in that alone. when i added my turbo it really woke up. (compared to bully dog triple dog w/crazy larry). i had my smarty set on stage 7 for several months an just the other day had some time to play with it. i put my truck back to stock. an could barely break 22 psi. haha then i put it on level 9 an i could tell a pretty signigicant difference from level 7 in the aspect of turbo lag. used to if i was runnin 55ish an pulled out to pass someone my turbo wouldnt light until i was beside the other vehicle. (resulting in a hellacious cloud for all behind me) whereas on level 9 it got right up an went so to speak. the turbo light right up an my truck was just at a haze by the time i pulled into the passing lane.
however. on level 9 everytime i shift my truck hazes a little. whereas on level 7 if i wasnt tryin to then it wouldnt.
however. on level 9 everytime i shift my truck hazes a little. whereas on level 7 if i wasnt tryin to then it wouldnt.
Last edited by crusty_critter03; 08-03-2011 at 10:33 PM.
#39
Re: SMARTY Settings
Cr's are not vp's... big difference in smartys
I have a comp with a smarty and 150' s. Comp off, smarty maxed, I can run 40 psi all day. Smart off, comp maxed, I hold 35 psi. comp definitely makes a difference on the top end, its dead on the bottom end w/o the smarty. Currently I am running comp 5x1, smarty lvl 4, torque 6, duration 5. I have not had much time to play, as I just did the comp. But this results in smooth power from bottom end to top. With the smarty, if I put the comp on sub 5, it is way too much smoke for on the road, got cussed out twice for filling cars full... guess its time for a stack. Smarty torque settings are for how strong you want it to hit when it hits. I roll 1600 pretty quick, waiting.on my manifold, turbo's in the garage
Sent from my ADR6300 using Tapatalk
I have a comp with a smarty and 150' s. Comp off, smarty maxed, I can run 40 psi all day. Smart off, comp maxed, I hold 35 psi. comp definitely makes a difference on the top end, its dead on the bottom end w/o the smarty. Currently I am running comp 5x1, smarty lvl 4, torque 6, duration 5. I have not had much time to play, as I just did the comp. But this results in smooth power from bottom end to top. With the smarty, if I put the comp on sub 5, it is way too much smoke for on the road, got cussed out twice for filling cars full... guess its time for a stack. Smarty torque settings are for how strong you want it to hit when it hits. I roll 1600 pretty quick, waiting.on my manifold, turbo's in the garage
Sent from my ADR6300 using Tapatalk
Thread
Thread Starter
Forum
Replies
Last Post
05cumminsCA
5.9 Liter CR Dodge Cummins 03-07
8
02-03-2015 09:29 PM