Twin help
#1
#3
#4
how bad do you want to go? my s300/475 combo is making 665. The injectors I am running now are not very street friendly. But it was making 602 and not nearly as much smoke. The valve seat is usually a problem on hardened seat heads like 02 and up. Seen 2 personally do it. Depending on how far you want to go you will also need trans mods, head studs, o-rings, springs and retainers. If I had the money I would be doing some injectors changes to find the best street friendly set that makes the most power. But my budget went down the tubes with slow work and 2 surgeries coming up.
#6
how bad do you want to go? my s300/475 combo is making 665. The injectors I am running now are not very street friendly. But it was making 602 and not nearly as much smoke. The valve seat is usually a problem on hardened seat heads like 02 and up. Seen 2 personally do it. Depending on how far you want to go you will also need trans mods, head studs, o-rings, springs and retainers. If I had the money I would be doing some injectors changes to find the best street friendly set that makes the most power. But my budget went down the tubes with slow work and 2 surgeries coming up.
---AutoMerged DoublePost---
You know any body sellin a s400 turbo?
Last edited by 00CumminsMan; 06-29-2010 at 09:59 PM. Reason: Automerged Doublepost
#9
post up in the vendor section my current injectors are not know exact size to me. local shop put them in. but if you want to run 12's get a s300 and a set of 150hp ddp or mach injectors and you are there for a lot less money than compounds and it will drive and tow fine. SOvp is what I am running with a drag comp. Looking to hit 700hp fuel only pretty soon.
#10
post up in the vendor section my current injectors are not know exact size to me. local shop put them in. but if you want to run 12's get a s300 and a set of 150hp ddp or mach injectors and you are there for a lot less money than compounds and it will drive and tow fine. SOvp is what I am running with a drag comp. Looking to hit 700hp fuel only pretty soon.