Hi again, done some research over the internet with not too much luck and I was wondering where the cheapest places are to get a stack setup? Im going to run all new 5" pipe from the turbo back going to 7" Bull Haulers. Just wondering how much a setup like this would cost because most of the setups that I found were like $1500.

 

Why dont you put a price quote on here.Price Quote - Request A Price - Diesel Bombers


Luke at dieseldawgs seems to have the hook up with the stacks.

 

another place to try is ebay find the ebay store chromeroom they got tons of kits and all sorts of good stuff pretty cheap to.

 

hey im new here and hoping to seal the deal on my 2000 dodge cummins tomorrow, Already has gauges and im itching to get a single stack on it, how abous do i go to do a price quote yall are talking about

 

You can always just make stack adapters that FTE diesel sells, I made mine pretty cheap. I started off by making a 5" hole in the center of a 12"x12" piece of steel, than I made 4 holes equally spaced on the ouside for mounting the stack to the bed, after that all I did was weld a piece of 5" pipe to one side of it (to connect to my expandit TB exhaust via flexpipe) and the other side I welded a piece of expanded 5" so I can swap stack tips ect.
If your looking for a full TB exhaust you may be able to find a downpipe or a half kit at least to get to the bed.