Stacks
Hi again, done some research over the internet with not too much luck and I was wondering where the cheapest places are to get a stack setup? Im going to run all new 5" pipe from the turbo back going to 7" Bull Haulers. Just wondering how much a setup like this would cost because most of the setups that I found were like $1500. :td:
|
Why dont you put a price quote on here.Price Quote - Request A Price - Diesel Bombers
Luke at dieseldawgs seems to have the hook up with the stacks. |
another place to try is ebay find the ebay store chromeroom they got tons of kits and all sorts of good stuff pretty cheap to.
|
price quote
hey im new here and hoping to seal the deal on my 2000 dodge cummins tomorrow, Already has gauges and im itching to get a single stack on it, how abous do i go to do a price quote yall are talking about
|
You can always just make stack adapters that FTE diesel sells, I made mine pretty cheap. I started off by making a 5" hole in the center of a 12"x12" piece of steel, than I made 4 holes equally spaced on the ouside for mounting the stack to the bed, after that all I did was weld a piece of 5" pipe to one side of it (to connect to my expandit TB exhaust via flexpipe) and the other side I welded a piece of expanded 5" so I can swap stack tips ect.
If your looking for a full TB exhaust you may be able to find a downpipe or a half kit at least to get to the bed. |
All times are GMT -5. The time now is 11:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands