what about fuel heater

 

dont need a fuel heater unless you live way way way up north.

 

ok got airdog installed had 15 psi fuel pressure shut truck off installed stelth plate now have only 4 to 6 psi put old pump cover back on now 6 to 8 psi please HELP

 

if you want to run with the factory fuel heater, you can do the following, take your factory filter and using a hack saw, cut off the filter element about a 1/4 inch from the seal, make sure the gasket is good and bolt it back in, then run you fuel line that comes from your airdog into the filter assembly and youll be good, we did this to a truck a while back, works great theres a similar write up around here some where.

 

Sounds like a leak in the system if your pressure dropped that much.

 

Nope, Thats what I was talkin to ya about yesterday luke. It was a issue with the high flow module. Think we've got it solved now!

 

sorry it's been so long since last post when not working hunting got problem solved will wright it up and post pics verry soon. It was a problem with high flow module.

---AutoMerged DoublePost---

 

yeah.