i dont know if i have the fass 150 or 95. the number on the filter is ws1001. i need to cahnge i think n i need to get the right filters.

 

the ws1001 is the water separator and you can clean that out. I don't know the cross for the 95 series as that is what I have. you should be able to read what you have on your tag on the pump

---AutoMerged DoublePost---

I believe you have the 150 according to what I read online so this should help
FASS - Fuel Air Separation System - fassride.com

 

well i just looked n i do have the 150. ff1010 n ws1001. what micron is the best to use. n whats the diff in them

 

the smaller the micron the better the filtration. I would just clean the ws. So I myself would go 3micron but thats whats stock on my 95 series.

 

good deal man. do you just rinse out the ws or is there more required.

 

they say gas or alcohol is a good cleaner for it. drain water separator, remove it partially fill the water separator with diesel fuel (gas or alky works great). gently shake the water separator while draining into a suitable container then reinstall and make sure you close the valve on the bottom when done. lube seal with oil not fuel.. hope that helps. I couldn't find a link online so this is coming out of my owners manual

 

thanks alot. will do.

 

the weather here sucked so it was nice to be able to help someone. rain kept me inside today so I did a lot of surfing

 

yeah i appreciated it man.