Aftermarket Automatic Transmission Question
#15
Just a few pictures there.
I have a SDS, Engle 111 cam, Ported Big Valve head, 75lb injectors, Blah blah blah.. It's a fun little ride.
#17
make sure your heat exchanger is flushed really well that is where a ton of crap stays. I would run amsoil myself in it for fluid. Once I get all the bugs worked out of my system I am going with amsoil. My stock cooler was completely stuffed and fluid was only going through the bypass between the lines so I junked it and went to another setup but it took some mods to make it fit. They stock ones cost a lot from dealer.
The following users liked this post:
91rangerturbo (05-15-2008)
#18
make sure your heat exchanger is flushed really well that is where a ton of crap stays. I would run amsoil myself in it for fluid. Once I get all the bugs worked out of my system I am going with amsoil. My stock cooler was completely stuffed and fluid was only going through the bypass between the lines so I junked it and went to another setup but it took some mods to make it fit. They stock ones cost a lot from dealer.
#20
I have seen that name before. And you also have a midbike? Were too much alike. LOL
Back on topic. I am looking at some transmission coolers from summit. What do you guys think is the best bang for the buck.
They range from 110.00 to 250.00 if i get this i also need a gauge too.
Fluid Coolers with Fan - summitracing.com
Back on topic. I am looking at some transmission coolers from summit. What do you guys think is the best bang for the buck.
They range from 110.00 to 250.00 if i get this i also need a gauge too.
Fluid Coolers with Fan - summitracing.com