Cheapest 120HP add on?
#3
$830 + $400 + $400 = $1630 plus shipping. Has to be a cheaper way.
---AutoMerged DoublePost---
I also have a FASS DRP, not high performance, but better than stock.
---AutoMerged DoublePost---
What about 125HP injectors and a boost fooler? How would it run and drive, and any durability issues?
---AutoMerged DoublePost---
I also have a FASS DRP, not high performance, but better than stock.
---AutoMerged DoublePost---
What about 125HP injectors and a boost fooler? How would it run and drive, and any durability issues?
Last edited by derherr65; 08-10-2013 at 07:37 PM. Reason: Automerged Doublepost
#4
Hey you wanna spend 5k for a twin turbo set up like i did. Be my guest. Bring it to my shop, and I will build it up. Got a budget your trying to stay with in?
---AutoMerged DoublePost---
I didn't see your split post my bad. Whats your GPH rating on the FASS?
---AutoMerged DoublePost---
I didn't see your split post my bad. Whats your GPH rating on the FASS?
Last edited by TheyCallMeCountry; 08-10-2013 at 09:23 PM. Reason: Automerged Doublepost
#5
#6
you can get a complete set of S300/S400 twins brand new for $3000
that's both turbos, plumbing, oil lines, support brackets, aux oil drain, and hardware.
only thing you gotta do yourself is paint it and assemble it on the truck.
#8
I agree.. Used can be a good way to go...I just sold my old DDP 150hp injectors a few weeks ago for $400. they made me 538hp 1078tq when I dyno'ed with them and most of my current setup (there have been supporting mod additions since then, but they were not power adders...just the new injectors were)
I'm just pretty much at the point now where my tired old SOVP44 is just running out of fuel and can't keep up with the heavy fueling or timing anymore. If I had a fresh SOVP I could probably easily break 600hp with my mods, but my tired old vp just can't pull it off...at least not on a mustang dyno ...could probably pull it off on a dynojet.
I'm just pretty much at the point now where my tired old SOVP44 is just running out of fuel and can't keep up with the heavy fueling or timing anymore. If I had a fresh SOVP I could probably easily break 600hp with my mods, but my tired old vp just can't pull it off...at least not on a mustang dyno ...could probably pull it off on a dynojet.
Last edited by jigabop; 08-13-2013 at 01:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Jojorusso111
Chevy/GMC Truck and Duramax Turbo Diesel Forum
2
11-02-2014 09:33 PM