HY35 to HX35
#12
No it wouldn't hurt nothin for you to do it. I'm not sure what the safe zone for boost with hx35 i been told like 45 or so. My truck with smarty on level 9 I'm stuck at 32 pounds but that's the only major mod I have other than intake work and exhaust. Hopin to get a fass pump and 150 hp injectors here with tax return money
#14
I would use a adjustable boost elbow or get a Edge Products boost elbow which happens to stop right at 35 PSI. Perfect limit and will support most mild mods without any problems. I don't suggest plugging or blocking the wastegate because you are taking a risk of damaging the turbo at one point or another. Not to mention much over 35 PSI and you now over the choke point and hot charging. Basically you want your boost pressure higher than drive pressure but much over 35 PSI it flips and drive pressure rises rapidly.
#17
The following users liked this post:
AlaskanRenegade (03-04-2013)
#18
hY vs hx35
I would use a adjustable boost elbow or get a Edge Products boost elbow which happens to stop right at 35 PSI. Perfect limit and will support most mild mods without any problems. I don't suggest plugging or blocking the wastegate because you are taking a risk of damaging the turbo at one point or another. Not to mention much over 35 PSI and you now over the choke point and hot charging. Basically you want your boost pressure higher than drive pressure but much over 35 PSI it flips and drive pressure rises rapidly.
#19
Thread
Thread Starter
Forum
Replies
Last Post
BIG SOCHA
24 Valve 2nd Gen Dodge Cummins 98.5-02
5
10-23-2014 11:01 PM