1/4 challenge
Exactly what Im saying.
adjust the wastegate and put a boost elbow in line, if ya cant get what ya need you can try to squeeze what you need out of it with what you have... safetly of course... no one wants to grenade their turbo
---AutoMerged DoublePost---
make sure your TV is adjusted properly, take off in 1st, put it in drive and hold it to the wood. WOT with a GSK i dont see why your trans wouldnt hold its shift til 2600 rpm.
---AutoMerged DoublePost---
make sure your TV is adjusted properly, take off in 1st, put it in drive and hold it to the wood. WOT with a GSK i dont see why your trans wouldnt hold its shift til 2600 rpm.
Last edited by tower_ofpower; Feb 25, 2011 at 03:55 PM. Reason: Automerged Doublepost
ditto. dont block it completely, Im sure with all that fuel you could push the little HX35 to 55lbs, but its not good for the turbo.
No, it isnt going to immediately blow it running to 55psi, but its very inefficient at that level, and im sure drive pressures are off the chart. ~35psi is the best for these.
Yup, Yup, and Yup.


