I'm looking at a 4" stainless diamond eye downpipe for my '03, my question is...will the end of the downpipe be pointing straight back and level after it is installed? I just ordered a stack kit and want to know what I will need to fill the gap between the back of the downpipe and the begining of the stack kit (flex pipe I believe)?

I figure I can easlily come up with a straight chunk of 4" pipe to fill the gap but I want to be sure that a straight piece will work, having to come up with something that needs a bend to attach to the downpipe will be a little more difficult with the truck in my garage

any experiences or knowledge appreciated!

 

i have the same question but with five inch down pipe to the flex pipe or if i need to add a little section of 5"pipe

 

you will have the downpipe...some pipe from the downpipe back to the bed and then flexpipe going to the stacks y pipe. as for the downpipe i dont remember if its curved or not.