5.9 Liter CR Dodge Cummins 03-07 Discussion of 5.9 Liter Dodge Cummins Diesels with Common Rail Injection

48re to 6 speed

Old Nov 23, 2010 | 01:03 PM
  #1  
94 5 speed's Avatar
Thread Starter
|
Diesel Fan
Joined: Sep 2010
Posts: 25
Likes: 0
From: florida
Default 48re to 6 speed

my friend has an 07 2500 with an auto and is sick of trans problems and we can get our hands on a 6 speed out of an 08 6.7. he was wondering if the bell housings are the same but i cant find anything online.
thanks
 
Reply
Old Nov 23, 2010 | 01:29 PM
  #2  
Red_Rattler's Avatar
High Tech Redneck

Joined: Nov 2007
Posts: 6,730
Likes: 496
From: Columbus WI
Default

He could have a very well BUILT auto for probably less than what he'll have in the conversion...
 
Reply
Old Nov 23, 2010 | 02:12 PM
  #3  
DIESELDENT's Avatar
BOMBARDIER
iTrader: (1)
Joined: Nov 2007
Posts: 3,260
Likes: 96
From: Bushwood, MD
Default

Dont think the bellhousings would be any different but from what ive seen around it isnt going to be cheep because of the computer, I beleve suncoast?? was/is working on a conversion for it and it was going to be aroun 9k with the trans. Also there isnt the aftermarket parts for them like the 48re which can be built to handle much more power for around 4k from goerend
 
Reply
Old Nov 27, 2010 | 03:31 PM
  #4  
07redsled's Avatar
Diesel Enthusiast
Joined: Nov 2008
Posts: 465
Likes: 18
From: schnecksville pa
Default

Its really easy I did the swap search it it is on this forum
 
Reply
Old Nov 28, 2010 | 05:25 PM
  #5  
millco's Avatar
Diesel Enthusiast
Joined: Aug 2008
Posts: 358
Likes: 23
From: Twin Falls, ID
Default

The total cost is going to depend on what you spend for all your parts. If you can get them reasonable then it will not cost too much. If you pay full retail and then have to have all the work hired done then it might be cheaper to just have your auto 'built' for a lot of power. You just have to decide which way you want to go.

Supposedly the Common Rail 5.9L and the 6.7L have the same block and bolt patterns. I would want to know for sure before I started it though.
 
Reply
Old Nov 28, 2010 | 09:45 PM
  #6  
osceola's Avatar
Newbie
Joined: Nov 2010
Posts: 1
Likes: 0
From: okeechobee
Default

i'm having the same problems with my 07 megacab would like to go to manual. also i've been told you could get your computer reprogrammed for the manual tranny.
 
Reply
Old Nov 29, 2010 | 08:57 AM
  #7  
harry22's Avatar
Diesel Enthusiast
Joined: Aug 2009
Posts: 334
Likes: 27
From: small town MN
Default

Originally Posted by DIESELDENT
Dont think the bellhousings would be any different but from what ive seen around it isnt going to be cheep because of the computer, I beleve suncoast?? was/is working on a conversion for it and it was going to be aroun 9k with the trans. Also there isnt the aftermarket parts for them like the 48re which can be built to handle much more power for around 4k from goerend
x2
 
Reply
Old Dec 1, 2010 | 05:04 PM
  #8  
07redsled's Avatar
Diesel Enthusiast
Joined: Nov 2008
Posts: 465
Likes: 18
From: schnecksville pa
Default

the computer end of it can all be solved by GOS diesel for 100 bucks and a 15 min download and the truck will run without the flash i ran mine for a year without the flash only thing i had to do was push button start, i did my whole stick swap for 3400 bucks and thats with a dd clutch and all new hydros i strongly recomend that if you want stick do it i will never own a auto diesel again
 
Reply
Old Dec 8, 2010 | 02:48 PM
  #9  
06Dodge's Avatar
Diesel Enthusiast
Joined: Mar 2007
Posts: 342
Likes: 22
From: Forest Grove Oregon
Default

I test drove a 6 speed, I bought mine with an auto transmission.
 
Reply
Old Dec 11, 2010 | 02:55 AM
  #10  
Cumminpwr11's Avatar
Diesel Fan
Joined: Dec 2010
Posts: 16
Likes: 0
Default

Is the original poster wanting a 6spd auto or a g56/nv5600 swap? been talking to suncoast about a 68rfe swap and I am looking at 7500 for there new comp 68rfe with tiptronic control behind my 5.9.
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:12 AM.