Lol that doesn't make sense...... You told me to crank it up half to 3/4 of turn now your saying you have to do it electronic ?

 

ha i understand that i didnt notice that you had a 24 valve until right before i sent that last message on the old 12's you could just get under there with a screw driver and crank it up

 

Oh that sucks man I wish I had that now ! I just can't seem to get smoke! I mean I have so much done to my truck I just thought it would naturally come!

 

The dodge dealer can't do anything to make more power with the star scan/drb/or even the new wi-tech. They can flash the hell out of it but its not going to make any more power.

Put a smarty on the truck. If you play with the pump/ cp3 mod the truck will actualy smoke less.
Heres the deal with a common rail engine. They make power with more fuel, air, and pressure. If your cp3 can keep the pressure up 25k+ at WOT you'll smoke less due to clean burns from the high pressure makeing it easier to burn the fuel.

 

I just need a smarty

 

Agree with the guy above. Go get a Smarty. Turn it up for a day and get your smoke fix. Then i would suggest leaving it on 90hp or below unless you wanna make the clutch cry for help. but yea it will give you plenty of smoke

 

Thats what i would be after!!! A fine tuned fire breathing monster!!

 

I have a smarty s06 in my 03 Common rail and it doesn't smoke at all.

 

Sell you a set of 90hp injectors and a smoked rail pressure sensor! All the smoke you want!