5.9 Liter CR Dodge Cummins 03-07 Discussion of 5.9 Liter Dodge Cummins Diesels with Common Rail Injection

ok boys... tell me what's wrong.

Thread Tools
 
Search this Thread
 
Old Jun 19, 2010 | 02:43 PM
  #1  
luv4rotties's Avatar
Thread Starter
|
Southern Redneck Girl
Joined: Nov 2008
Posts: 455
Likes: 31
From: Hampstead, NC
Default ok boys... tell me what's wrong.

For the last week, my truck thinks the key is in the ignition when it isn't. door won't lock, radio stays on with the doors open....and it dings like the door is open even when it's not....doesn't do it everytime I cut it off, but it does it alot and it's getting downright aggravating.

could be an ignition switch short.. or short in the steering column I know.. but how to make it stop is what I need to know....I've done everything from turning the key off and on, to tilting the wheel, to starting it back up.....etc..... HELP!!
 
Reply
Old Jun 19, 2010 | 03:14 PM
  #2  
dangerous1965's Avatar
Diesel Bomber
Joined: Dec 2008
Posts: 1,714
Likes: 112
From: Escondido CA
Default

Spray some lube in the key hole and put the key in and out alot wiggle it around see if that helps. If it thinks a door is open check the door sensors for a short or break.
 
Reply
Old Jun 19, 2010 | 10:05 PM
  #3  
luv4rotties's Avatar
Thread Starter
|
Southern Redneck Girl
Joined: Nov 2008
Posts: 455
Likes: 31
From: Hampstead, NC
Default

lube in the key hole??? seriously?? the key doesn't stick.... wow lots of answers on here ... it don't think the door is open.. it thinks the key is still in the ignition when it isn't. it's not throwing any codes either.
 
Reply
Old Jun 19, 2010 | 10:42 PM
  #4  
captain_stabbin's Avatar
Diesel Wrench
Joined: Aug 2009
Posts: 919
Likes: 27
From: houston, tx
Default

sounds like a common wire problem! sina i wish i knew, my guess would be bad ignition!
 
Reply
Old Jun 19, 2010 | 11:35 PM
  #5  
12vcummins96's Avatar
Administrator

Joined: Aug 2009
Posts: 5,765
Likes: 340
From: Pearland Tx
Default

ok im gonna chime in the body control modules in these dodges are junk it needs to be put on a scanner to check for body control codes hun call me i will help you out sweety
 
Reply
Old Jun 20, 2010 | 10:41 AM
  #6  
dangerous1965's Avatar
Diesel Bomber
Joined: Dec 2008
Posts: 1,714
Likes: 112
From: Escondido CA
Default

A little lube never hurt anything! Seriously I was thinking the pin inside was getting stuck! Start simple work your way up!
 
Reply
Old Jun 20, 2010 | 02:55 PM
  #7  
00' Quad Cab's Avatar
Diesel Wrench
Joined: Mar 2007
Posts: 550
Likes: 43
From: Aberdeen, WA
Default

Mine did this at one time, the suggestions about the lube are right on for the fix I needed.
 
Reply
Old Jun 20, 2010 | 03:37 PM
  #8  
NadirPoint's Avatar
Diesel Bomber
Joined: Aug 2009
Posts: 2,257
Likes: 186
From: CO
Default

TIPM (Total Integrated Power Module) Should stand for: Totally Irrational Piece 'o Manure.
 
Reply
Old Jun 20, 2010 | 06:32 PM
  #9  
luv4rotties's Avatar
Thread Starter
|
Southern Redneck Girl
Joined: Nov 2008
Posts: 455
Likes: 31
From: Hampstead, NC
Default

Thanks guys for the input.....it only does it when I'm by myself and in a hurry... go figure on that one.. when Kevin is in the truck with me... it won't do it. Damn truck hates me.

I'll try the lube... and go from there. Troy I'll call you too
 
Reply
Old Jul 8, 2010 | 02:13 PM
  #10  
AABEAR's Avatar
Diesel Enthusiast
Joined: Apr 2009
Posts: 191
Likes: 5
Default

Try dissecting the BAT's for 10 mins then replace. This some time will fix it.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
General Diesel Related
0
Sep 21, 2015 06:10 PM
jjbced
Chevy/GMC 6.2L and 6.5L
5
Jul 19, 2015 10:03 AM
Bob V
Ford Powerstroke 03-07 6.0L
4
Apr 6, 2015 11:02 PM
nelly559
24 Valve 2nd Gen Dodge Cummins 98.5-02
5
Feb 2, 2015 08:19 AM
cutthroatxxx
Ford Powerstroke 99-03 7.3L
0
Nov 16, 2014 09:11 PM




All times are GMT -5. The time now is 07:41 AM.