Installed new motor having issues......
#1
Installed new motor having issues......
I just installed a new motor in my 03 ram 2500 5.9 cummins auto with a fass fuel set up. After hooking everything up I have no gauges and it will not start. It will turn over but not start. I get 300 rpms on my scanner. The crank sensor and the cam sensor take the same plug which is which? I have fuel to the cp3, and I have fuel out of the line on the back of the cp3. But ... it seems like not much fuel if any come out if the rail when I Crack open an injector line. Anybody have any more insight. It will not start when I unplug the cp3. What is going on here? What did I miss ?
The following users liked this post:
geatgavi (06-13-2015)
#2
Oh and the motor came out of an 03 with an auto as well. I heard the truck run before the engine was pulled. I used my ecm and harness that stayed in my truck. I installed the complete engine as a unit. Exhaust, intake, fuel system, valve cover, everything but harness, ac, power steering and alt.
The following users liked this post:
geatgavi (06-13-2015)
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
Latest Automotive Industry News
1
04-11-2015 02:47 PM
ronstop
5.9 Liter CR Dodge Cummins 03-07
0
02-26-2015 09:48 AM
Diesel Bombers
Latest Automotive Industry News
0
10-03-2014 11:30 AM