Diesel Bombers

24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

Priming fuel system

   
Old Jul 18, 2012 | 12:21 PM
Share
  #11  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default
Dripping, or spraying? There should be a decent amount of fuel to the VP.

If there is fuel to the VP, crack some injector lines to bleed out the lines.
 
Reply
0
Old Jul 18, 2012 | 12:26 PM
Share
  #12  
1999stroker's Avatar
Thread Starter
|
Diesel Bomber
Joined: Jun 2011
Posts: 3,368
Likes: 143
From: Squaller holler, ohi
Default
It was dripping but I had the banjo bolt all the way off. So I should just loosen it a quarter turn and bump the starter until it sprays out? :banghead::banghead:

Sent from my dumb phone!
 
Last edited by 1999stroker; Jul 18, 2012 at 12:30 PM.
Reply
0
Old Jul 18, 2012 | 12:32 PM
Share
  #13  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default
Hmmm, might need to back up a little here.
Stock fuel pump? If so, block mounted or in tank?

How many times have you let the fuel pump run for the 25 seconds?
 
Reply
0
Old Jul 18, 2012 | 12:34 PM
Share
  #14  
1999stroker's Avatar
Thread Starter
|
Diesel Bomber
Joined: Jun 2011
Posts: 3,368
Likes: 143
From: Squaller holler, ohi
Default
I believe block mounted I can hear it running when I put my head in the engine compartment. Don't know if its stock of not.

Sent from my dumb phone!
 
Reply
0
Old Jul 18, 2012 | 12:36 PM
Share
  #15  
1999stroker's Avatar
Thread Starter
|
Diesel Bomber
Joined: Jun 2011
Posts: 3,368
Likes: 143
From: Squaller holler, ohi
Default
I've done it a bit letting it prime

Sent from my dumb phone!
 
Reply
0
Old Jul 18, 2012 | 12:36 PM
Share
  #16  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default
99% chance it it stock. Most of the time when an upgraded pump is installed, its frame mounted.

Try loosening the inlet banjo bolt a half turn or so, while bumping the starter to run the pump.
 
Reply
0
Old Jul 18, 2012 | 12:39 PM
Share
  #17  
1999stroker's Avatar
Thread Starter
|
Diesel Bomber
Joined: Jun 2011
Posts: 3,368
Likes: 143
From: Squaller holler, ohi
Default
Ok the inlet bolt on fuel canister or #4 on the injection pump? My buddy told me he just opens the water drain valve and let's it crank for 10 sec. Which I don't see how that would work?

Sent from my dumb phone!
 
Reply
0
Old Jul 18, 2012 | 12:40 PM
Share
  #18  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default
That wouldn't work very well at all. Crack #1 in the picture, fuel supply line.
 
Reply
0
Old Jul 18, 2012 | 12:46 PM
Share
  #19  
1999stroker's Avatar
Thread Starter
|
Diesel Bomber
Joined: Jun 2011
Posts: 3,368
Likes: 143
From: Squaller holler, ohi
Default
Ok thanks raw. Im going to grab some tools and go try. How many times should i prime? Until fuel flows? And sorry what's your name?


Adam

Sent from my dumb phone!
 
Reply
0
Old Jul 18, 2012 | 01:05 PM
Share
  #20  
1999stroker's Avatar
Thread Starter
|
Diesel Bomber
Joined: Jun 2011
Posts: 3,368
Likes: 143
From: Squaller holler, ohi
Default
Oj tried that still nothing fuel dripping out

Sent from my dumb phone!
 
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 03:40 AM.