loosing boost codes p1693/1694
#1
loosing boost codes p1693/1694
2001 dodge ram 3500. just installed a jasper tranny. cold air intake.removed a diablo puck and a superchip programer. throttle position senor replaced 8 mo's aqo. f.a.s.s. lift pump
now rough idle morning starts with alot of black smoke until i get underway and press acc pedal down twice. when hit a bump in the road the turbo boost falls to half and rpms go to 1500. when i press the pedal up & down twice the turbo kicks in and boost goes to normal. one shop said the injection pump wiring harness is bad. another shop says it is the injection pump. i have only p1693/1694 codes. the mech found the same thing on his reader.dont know what to do.
now rough idle morning starts with alot of black smoke until i get underway and press acc pedal down twice. when hit a bump in the road the turbo boost falls to half and rpms go to 1500. when i press the pedal up & down twice the turbo kicks in and boost goes to normal. one shop said the injection pump wiring harness is bad. another shop says it is the injection pump. i have only p1693/1694 codes. the mech found the same thing on his reader.dont know what to do.
Last edited by knanabou; 05-20-2012 at 08:31 PM.
#2
#3
dont know pressure.replaced a working lift pump with a fass pump a month ago. had the truck a year now and as far as i know, the lift pump always worked. someone cut off plug at injection pump and wirenutted it back. i thought that might be the problem. i will check the pressure. was hoping it is not inj.pump. bought this truck a year ago and spent more $ into the truck than i paid for it. thanks for your help.
---AutoMerged DoublePost---
where would be the best place to buy an injection pump
---AutoMerged DoublePost---
where would be the best place to buy an injection pump
Last edited by knanabou; 05-21-2012 at 12:58 AM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
stewart.william.c
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
02-11-2015 01:39 AM