cutting out?
#13
put the chip on strock, tried to do a boost launch and it didnt cut out. its like i didnt have the power to get the rpm's up to where it would cut out. turn the chip back up and it cuts out. tried another adr box with a different tune on it and it cut out. it cuts out at around 28-30psi of boost... could this be a rev limiter issue? over boost? cuz i have seen 40-43 psi on the adr gauge with my stock hy35
#15
Just put in a fp gauge.. 15pis at idle and 11.5~12 paid wot...when it cuts out the needle jumps back abd forth from like 11 to 13 really fast.. it just starts to bounce there...let off the brake stays around 12....this is killing me
---AutoMerged DoublePost---
Any info on the rad box?
---AutoMerged DoublePost---
Any info on the rad box?
Last edited by wilke12V; 01-07-2012 at 11:02 AM. Reason: Automerged Doublepost
#16
#17
i heard of the torq assist and i want to find out how to turn it off. My 01 has the same problem with a new vp44 with a rapter 100 feeding it. got a fuel pressure gague to and i can watch it bounce but its still getting fuel. i can be sitting there with my foot on the brake let go slam the gas pedal and it will pop and skip almost like it wants to do a wheelie . i cant even do a burn out because of it!
#18
#19