get a fuel gauge on it! my 12v does the same thing because i cant give her enough fuel. maybe air leaks in the system pre pump?

 

MY TRUCK RUNS 15PSI AND 11PSI AT WO

 

you need a bd rad box

 

sounds like you need the fg.i'm wondering if your having an issue with your fuel pick up in the tank thats starving the vp of fuel when your on the go pedal.

 

Just put in a fp gauge.. 15pis at idle and 11.5~12 paid wot...when it cuts out the needle jumps back abd forth from like 11 to 13 really fast.. it just starts to bounce there...let off the brake stays around 12....this is killing me

---AutoMerged DoublePost---

Any info on the rad box?

 

Mine does the same thing. It used to stutter alot worse and different before the lift pump. Bit with th raptor 150 it only stutters when I do boosted launches like you said. Id like to find a fix for it also...

 

i heard of the torq assist and i want to find out how to turn it off. My 01 has the same problem with a new vp44 with a rapter 100 feeding it. got a fuel pressure gague to and i can watch it bounce but its still getting fuel. i can be sitting there with my foot on the brake let go slam the gas pedal and it will pop and skip almost like it wants to do a wheelie . i cant even do a burn out because of it!

 

You will have to get a Smarty to remove the Torque Management.

Luke

 

yeah thats what im thinking of doing now is stack my quadzilla with a smarty. now if you stack the smarty with the zilla, do you have to run both of them at lets say level 5 or can you run the zilla level 1 and the smarty at level 6?

 

I think the way that works is you run the smarty on a level that doesn't adjust timing and then you can run the quad like you normally would.