'99 wont start
#1
'99 wont start
This might be kind of long but bear with me I don't know much about these 24 valves. I'm helping one of my friends with his truck. He put stopped to put fuel in it and it wouldnt start. So far ive replaced the lift pump because it wouldn't kick on after bumping the starter,and I have it wired to a switch now. I know this was a bad thing to do but he sprayed a bunch of either into it and when it caught I noticed that the tach and oil pressure didn't move even though it was spinning at a good pace. Is there a sensor that tells the ecm that it turning over to give power to the vp44? Its got fuel to the ip but not to the injectors.
#3
If he ran out, you need to prime the fuel system, don't use either ever on a cummins. To prime the system, there are 2 bolts on top of the filter housing, I forget which one it is, but crack open one of them and turn key till you get fuel, try starting, if it stilll won't start thecheck the fuel pump relay inside the fuse box under the hood
#4
#6
Thread
Thread Starter
Forum
Replies
Last Post
Cavnar
Diesel In Distress - Support Ticket
3
09-09-2015 07:18 PM
cjgregory
Diesel In Distress - Support Ticket
0
03-31-2015 01:45 PM
ronstop
5.9 Liter CR Dodge Cummins 03-07
0
02-26-2015 09:48 AM
carid
Diesel Bombers Sponsors
0
11-18-2014 06:49 AM