01 24v auto-want to build up tranny
#13
I would 2nd this. But since the transmission has 160k on it I would do a rebuild first. Putting a valve body and good TQ Converter in a tired tranny is not a good idea.
#14
#15
I should have specified that too. A good solid rebuild along with the shaft, TC, and valve body will be more than enough for 400 HP
#16
#17
#18
01 24v auto-want to build up tranny
Save yourself the 800 bucks and don't do a billet input for 400 horse... If you're not doing locked shifts or truck pulling it's not likely to break under that power... A good single stage billet converter is plenty too for daily driving. I mean unless you have the dough to spend of course
Thread
Thread Starter
Forum
Replies
Last Post
Tower crane guy
Ford 83-94 6.9 and 7.3L General
3
10-22-2014 06:04 PM