No start, no start. Ok, it started.
#11
If you still have the OEM starter, keep it and do the starter contacts from Larry B. I doubt anything else is wrong with your starter, but you might end up with endless headaches with a reman (forget the price of a new one). My .02
It's a job you can relatively easily do yourself. All you need is a 12 point 10mm wrench (or whatever size it is) and a lot of strength. There are only three bolts holding it in...
I have done the starter contact swap on four trucks already and can usually get the whole R&R thing done in less than an hour.
It's a job you can relatively easily do yourself. All you need is a 12 point 10mm wrench (or whatever size it is) and a lot of strength. There are only three bolts holding it in...
I have done the starter contact swap on four trucks already and can usually get the whole R&R thing done in less than an hour.
The following users liked this post:
Nitelord (09-14-2010)
#12
Thread
Thread Starter
Forum
Replies
Last Post
Cavnar
Diesel In Distress - Support Ticket
3
09-09-2015 07:18 PM
cjgregory
Diesel In Distress - Support Ticket
0
03-31-2015 01:45 PM
ronstop
5.9 Liter CR Dodge Cummins 03-07
0
02-26-2015 09:48 AM
carid
Diesel Bombers Sponsors
0
11-18-2014 06:49 AM