A/c Fan control...
Thread Starter
|
Diesel Fan
Joined: May 2008
Posts: 59
Likes: 2
From: Deer Park, TeXas
A/c Fan control...
Okay, I replaced the fan motor because it was making some HORRID noise and would only work on the highest speed setting. Still only working on highest setting, so I replaced the switch panel on the dash and it still only works on highest setting... So I assume that there is a control module somewhere under the dash. Is that correct or am I missing something?
Yep, there is a resistor pack near the blower motor. I had the same situation when I first bought my truck. Ended up being a solder that had failed. Re soldered it, and had all speeds again.
---AutoMerged DoublePost---
Check this old thread out:
https://www.dieselbombers.com/24-val...eater-fan.html
---AutoMerged DoublePost---
Check this old thread out:
https://www.dieselbombers.com/24-val...eater-fan.html
Last edited by RAW; Jul 12, 2010 at 10:19 PM. Reason: Automerged Doublepost
Thread Starter
|
Diesel Fan
Joined: May 2008
Posts: 59
Likes: 2
From: Deer Park, TeXas
Yep, there is a resistor pack near the blower motor. I had the same situation when I first bought my truck. Ended up being a solder that had failed. Re soldered it, and had all speeds again.
---AutoMerged DoublePost---
Check this old thread out:
https://www.dieselbombers.com/24-val...eater-fan.html
---AutoMerged DoublePost---
Check this old thread out:
https://www.dieselbombers.com/24-val...eater-fan.html
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
Feb 7, 2023 01:15 AM
Jet A Fuel
6.7 Liter Dodge Cummins 07.5-12
3
Aug 3, 2015 10:45 AM
