A/c Fan control...
Okay, I replaced the fan motor because it was making some HORRID noise and would only work on the highest speed setting. Still only working on highest setting, so I replaced the switch panel on the dash and it still only works on highest setting... So I assume that there is a control module somewhere under the dash. Is that correct or am I missing something?:pca1:
|
Yep, there is a resistor pack near the blower motor. I had the same situation when I first bought my truck. Ended up being a solder that had failed. Re soldered it, and had all speeds again.
---AutoMerged DoublePost--- Check this old thread out: https://www.dieselbombers.com/24-val...eater-fan.html |
Originally Posted by RAWilliams
(Post 588548)
Yep, there is a resistor pack near the blower motor. I had the same situation when I first bought my truck. Ended up being a solder that had failed. Re soldered it, and had all speeds again.
---AutoMerged DoublePost--- Check this old thread out: https://www.dieselbombers.com/24-val...eater-fan.html |
No problem at all!! Look forward to hearing what you find.:tu:
|
The solder joint was busted, but the white porcelain is all busted up and half missing, so I replaced it with a new one for $50:pca1:
|
All times are GMT -5. The time now is 09:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands