failure codes for a vp 44 injection pump
#11
#13
the stealth cover is still a "tap" and a shop could take it apart and see the indentation on the solder and know it was tapped. I recommend running it for 2-3 months w/o a tap as any problems are likely to show on the first month of operation. Then doing a good connection with a posi-tap for $5 or less or the stealth cover.
the stealth cover may have worked some with dealers, but a picky shop could void the warranty and would be within their rights to do so.
the stealth cover may have worked some with dealers, but a picky shop could void the warranty and would be within their rights to do so.
#14
Thanks for all the help. I did get lucky and i was close to home when it happened now all i have to do is find some money to buy a new pump. Should i continue to run the edge with a new pump since i have to tap in to the injection pump wires, or run it stock until i can get a smarty.
Alos, make sure you buy a VP-44 that has NEW electronics.
Thread
Thread Starter
Forum
Replies
Last Post
scottxmorris
24 Valve 2nd Gen Dodge Cummins 98.5-02
8
03-04-2015 10:22 PM